
In-Depth Guide to Access wifi wavlink com ap setup Wizard
To make changes to the settings of a Wavlink range extender, one needs to access the wifi wavlink com ap setup wizard; also known as the extender’s dashboard. However, a report has revealed that many users are struggling to access the dashboard of their wireless extenders. If you are amongst them, then you’ve stumbled upon the right post.
Here, we will provide you with step-by-step guidelines to access the Wavlink WiFi extender dashboard. Continue reading.
Steps to Access wifi wavlink com ap setup Wizard
- To begin with, switch on your Wavlink wireless extender after connecting it to an electrical outlet. However, you need to make sure that your device is receiving an adequate power supply throughout the process.
- Get hold of an RJ45 network cable and consider connecting your host AP to the extender using it. In case you are not in the mood to use a cable, a wireless source can also be used.
- Once done, switch on your computer and pull up an internet browser. Multiple options are available at your disposal pertaining to the selection of the internet browser. For your information, any internet browser out of Chrome, Internet Explorer, Firefox, Safari, Edge, etc. can be used.
- Take the cursor to the location (address) bar and insert the Wavlink extender’s default URL. When we say location bar, it means you are not allowed to use another location for the web address entree. After inserting the web URL, do not forget to hit Enter.
- The admin page of your Wavlink device will appear on the screen. Here, you will have to input the default password of your wireless extender. Also, select the language preference using which you can easily manage your extender. Thence, select Login.
- With the click of the Login button, you will be taken to the wifi wavlink com ap setup wizard. Here, you will see various tabs that can be accessed to manage your WiFi device. So, click the tab of your choice and enjoy managing your Wavlink extender.
This completes the process of accessing the wifi wavlink com ap setup wizard. Although it is quite easy to reach the management page of the Wavlink range extender, users face issues while doing so. To make sure you don’t stand in their queue, refer to the points discussed in the next section.
Tips to Access wifi wavlink com ap setup Wizard
- Never use a non-working electrical socket for powering up your Wavlink extender. Doing so exposes your wireless device to the risk of permanent damage due to a sudden surge or outage of electricity.
- The RJ45 network cable connecting your Wavlink extender to the host AP must be damage-free. In addition, the network cable connection ought to be strong. Failure to fulfill any of these requirements might prevent you from accessing the wifi wavlink com ap setup wizard.
- There must be a minimum distance between your Wavlink range extender and the main AP. It will allow wireless signals to propagate efficiently. However, avoid keeping the distance zero. Otherwise, you might encounter serious issues while using your Wavlink extender.
- Have you installed an antivirus on your PC to keep malware and viruses at bay? Well, that’s good. But, you need to disable it temporarily if you want to access wifi wavlink com ap setup wizard without any hassle. It is because antivirus software halts access to various networking sites including the Wavlink extender default URL.
- Always use an updated web browser to reach the Wavlink extender dashboard. So, just in case the one you are using is outdated, get it updated immediately. Also, be sure that there are no cookies, cache, and browsing history affecting the performance of your web browser. To be on the safe side, you can delete them.
- The default password of the extender is the most crucial factor that determines the success of accessing the wifi wavlink com ap setup wizard. Therefore, it must be entered without any typing mistakes. Additionally, if you’ve assigned a new password to your Wavlink device after setting it up, consider using the modified one.
The Conclusion
Here, we are wrapping up the guide to access the wifi wavlink com ap setup wizard. Can we hope that you will be able to access the extender’s dashboard with the help of the steps and tips discussed above?
However, if you need more help regarding the process of accessing the Wavlink setup wizard or managing it, have a word with our experts. FYI, they are working day and night to help Wavlink extender users.