Is Your Wavlink Router Flashing Red Light? Here’s the Fix!
Although Wavlink WiFi routers are wonderful devices to consider when it comes to providing blazing-fast internet speeds. However, users face various issues with their Wavlink routers. One such issue that makes the user’s internet experience worse is the Wavlink router flashing red light issue.
If the LED light on your Wavlink WiFi router is also flashing red, then the problem needs to be addressed. Given in this post are tested and proven troubleshooting techniques that will help you resolve the flashing red light on your Wavlink router. But, before that, know the reasons that might have put you in this situation.
Why is Wavlink Router Flashing Red Light?
- Your Wavlink router is not getting adequate electricity
- The Wavlink device is situated at too much distance from the modem
- The router is operating on an obsolete firmware version
- The number of transmitting appliances is present near the WiFi router
- A hoard of devices are accessing the Wavlink WiFi router
So, these were the most possible reasons that might be dragging you to the Wavlink router flashing red light issue. Now, read on and find out how to get it fixed.
Fixed: Wavlink Router Flashing Red Light
Before you start troubleshooting the red light issue with your Wavlink WiFi router, consider giving it a fresh start. Sometimes, what your Wavlink router requires is a simple reboot. FYI, rebooting is an act of giving some rest to your Wavlink router in order to fix technical glitches. However, for that, you need to switch off your WiFi router for a few moments and turn it on back. If rebooting fails to work in your favor, prepare yourself to give a shot at the following tips to fix the Wavlink router flashing red light issue.
Tip 1- Check Power Socket
Check whether the wall outlet chosen to supply electricity to your Wavlink WiFi router is working or not. The reason is that a broken or short-circuited wall socket results in insufficient electricity which bears unfavorable outcomes.
In case the wall socket is found damaged, you can either choose to fix it or plug your wireless router into another wall socket. Thereafter, see to it if your Wavlink router is still flashing the red light.
Tip 2- Reduce the Router-Modem Distance
Placing the Wavlink router and modem at too much distance isn’t a good idea at all. Rather, it is most likely to result in issues similar to the Wavlink router flashing red light. Now, you might be thinking of placing your WiFi devices together, right?
But, doing so is also not a good idea as it can result in a clash of WiFi signals of both devices that can be eerier. Thus, the distance separating your WiFi devices must be so accurate that signal propagation won’t get hampered.
Tip 3- Update the Firmware
Do you keep ignoring pending firmware updates of your Wavlink router? Well, you shouldn’t have done that. After all, the efficiency of your Wavlink router depends on its firmware. If the firmware is kept updated, everything will work fine for you. Else, your router might not only deliver patchy internet speeds but also flash red light.
Therefore, access the Wavlink router setup wizard and get the firmware of your WiFi device updated. In case you face issues while updating your Wavlink router, consider taking help from our experts. They will guide you at every step of the Wavlink router firmware update process.
Tip 4- Remove Signal Interference
Technology has revolutionized us completely. Now, our life depends on smart devices and appliances. But, did you ensure that the WiFi signals of your Wavlink router won’t get interrupted? Probably not. These smart devices and appliances generally utilize radio waves to operate that tend to mess up with the WiFi signals of your router.
Therefore, your Wavlink router is not supposed to share its location with devices and appliances like televisions, Bluetooth speakers, baby monitors, refrigerators, microwave ovens, etc. Besides, fish tanks have the ability to diminish WiFi signals due to the absorbing property of water. Thus, consider placing your Wavlink router away from any object that carries a large amount of water.
Tip 5- Reduce Devices Accessing Your Router
You might also face the Wavlink router flashing red light issue if a number of devices are accessing your router. It is because the incoming traffic to the router increases which makes it flash the red light.
Therefore, consider reducing the number of devices accessing your Wavlink WiFi router and see if this hack brings you luck.
It is quite common for a Wavlink WiFi router to flash red light. However, with proper identification of the reason and correct troubleshooting technique, one can easily get rid of the issue. Hopefully, the Wavlink router flashing red light issue won’t trouble you any longer after implementing the troubleshooting tips discussed in this post.
However, if you are still finding yourself in a no-win situation, the time to contact our technical experts has come. No matter whether you contact them during the day or night, you’ll always find them ready to help you.